Carbon Steel Pipes
Alloy Steel Pipes
EN 10216-2 P195GH
EN 10216-2 P235GH
EN 10216-2 P265GH
EN 10216-2 P280GH
EN 10216-2 P295GH
EN 10216-2 16Mo3
EN 10216-2 10CrMo5-5
EN 10216-2 10CrMo9-10
EN 10216-2 11CrMo9-10
EN 10216-2 13CrMo4-5
EN 10216-2 15NiCuMoNb5-6-4
EN 10216-2 X10CrMoVNb9-1
EN 10216-2 X10CrWMoVNb9-2
Product

 

 

 

 

 


Home | About Us | Product | Know How | Contact Us
   
EN 10216-2 Seamless steel tubes for pressure purposes Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Standard: EN 10216-2
Equivalent Standards: DIN 17175, BS 3059, ASTM A210, ASTM A178, ASTM A106, ASTM A213, ASME SA213, ASTM A335, GB 5310, JIS G3456, JIS G3461
Material: P265GH, 1.0425
Equivalent Materials: St44, St45.8, 1020, 410, SA53 Grade B, SA106 Grade B, S 430, 20G, 20MnG, SA178C, SA210A1, STP370, STP410, STB410, 0.25C, C-Min-Si
Chemistry Composition
C, %
Si, %
Mn, %
P, %
S, %
Cr, %
Ni, %
Cu, %
Mo, %
Nb, %
Ti, %
V, %
0.20 max
0.40 max
1.40 max
0.025 max
0.020 max
0.30 max
0.30 max
0.30 max
0.08 max
0.01 max
0.04 max
0.02 max
Mechanical Properties
Tensile Strength , MPa
Yield Strength, MPa
Elongation, %
410-570
265 min
21 min
Outside Diameter & Tolerance
Hot rolled
Outside Diameter, mm
Tolerance
OD≤219.1
±1% or ±0.5mm
OD>219.1
±1% or ±0.5mm
Cold Drawn
Outside Diameter, mm
Tolerance
OD≤114
±0.5% or ±0.3mm
Wall thickness & Tolerance
Hot rolled
Outside Diameter, mm
WT/OD
Tolerance
OD≤219.1
WT/OD≤2.5%
±12.5% or ±0.4mm
2.5%<WT/OD≤5%
5%<WT/OD≤10%
WT/OD>10%
OD>219.1
WT/OD≤2.5%
±20%
2.5%<WT/OD≤5%
±15%
5%<WT/OD≤10%
±12.5%
WT/OD>10%
±10%
Cold Drawn
Outside Diameter, mm
-
Tolerance
OD≤114
-
±10% or ±0.2mm
EN 10216-2 specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.
Manufacture: tubes to EN 10216-2 shall be manufactured by hot formed or cold finished.
Heat Treatment: the tubes shall be supplied in normalized delivery condition.
Inspection & Test: chemistry composition test, tensile test, flattening test, flaring test, NDT, surface inspection and dimension check.
Length: 5800mm; 6000mm; 10000mm; 11500mm; 11800mm; and so on.
Max length: 18000mm, also U bending can be offered.
Keyword: EN 10216-2, DIN 17175, High Pressure Steel Pipe, Boiler Steel Pipe
 
Home | About Us | Product | Know How | Contact Us
Copyright © TubeMFG. Powered by TubeSolution