|
|
| Home | About Us | Product | Know How | Contact Us | |
 |
|
| ASTM B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube | |
| This specification covers iron-nickel-chromium-molybdenum alloys (UNS N08366 and UNS N08367) cold-finished annealed of hot-finished annealed seamless pipe and tube intended for use in special corrosive service and for heat-resisting applications. Pipe and tube shall be supplied in the solution heat treated and descaled condition. When bright annealing is used, descaling is not necessary. The tensile strength, yield strength, and elongation shall conform to the specified values. The pipe and tube shall be subject to a hydrostatic test. | |
| 1. Scope | |
1.1 This specification covers iron-nickel-chromium-molybdenum alloys (UNS N08366 and UNS N08367)* cold-finished annealed or hot-finished annealed seamless pipe and tube intended for use in special corrosive service and for heat-resisting applications. 1.2 Pipe and tube shall be supplied in the solution heat treated and descaled condition. When bright annealing is used, descaling is not necessary. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. |
|
If you have request on these kind tubes, please |
|
 |
|
| 2. Referenced Documents | |
ASTM Standards A450/A450M Specification for General Requirements for Carbon and Low Alloy Steel Tubes |
|
| Keywords | |
Annealing - Austenitic Stainless Steel - Corrosive Service Applications - High-Temperature Service Applications - High-Temperature Services - Stainless Steel Pipes - Stainless Steel Tubes - Tubular Products |
|
Download this standard, please visit |
|
 |
|
| Home | About Us | Product | Know How | Contact Us | |