|
|
| Home | About Us | Product | Know How | Contact Us | |
 |
|
| ASTM B161 Standard Specification for Nickel Seamless Pipe and Tube | |
| This specification covers the standard requirements for nickel (UNS N02200) and low-carbon nickel (UNS N02201) in the form of cold-worked seamless pipe and tube. The material shall conform to the specified chemical composition limits for nickel, copper, iron, manganese, carbon, silicon, and sulfur which shall be determined by chemical analysis. Tension test shall be performed; wherein, the tensile properties for the material specified as small-diameter and light-wall tube shall be in conformity with the tensile strength, yield strength, and elongation requirements. Each pipe or tube shall also be subjected to nondestructive electric test or hydrostatic test in accordance with a referenced ASTM document to determine the allowable fiber stress for the annealed and stress-relieved materials. | |
| 1. Scope | |
1.1 This specification covers nickel (UNS N02200)3 and low-carbon nickel (UNS N02201)3 in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1. 1.1.1 Hot-worked material is available. Properties are to be agreed upon between the manufacturer and purchaser. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. |
|
If you have request on these kind tubes, please |
|
 |
|
| 2. Referenced Documents | |
ASTM Standards B829 Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
| Keywords | |
| Cold Working - Forming - Nickel - Seamless Nickel Pipes - Seamless Nickel Tubes - Seamless Pipes And Tubes | |
Download this standard, please visit |
|
 |
|
| Home | About Us | Product | Know How | Contact Us | |